Announcement

Collapse
No announcement yet.

BMW M235GC map0 + map1 + map2 - feedback please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BMW M235GC map0 + map1 + map2 - feedback please

    Fresh install. Mileage 76000 km. BMW M235 Gran Coupe 2020. RON98 only.
    Attached Files
    Last edited by szuli; 04-28-2023, 08:16 AM.

  • #2
    As you add boost, you're getting more timing corrections. I'd stick with map 1 unless you're able to fill up with better fuel. or add meth You could run map 2 but you're getting more timing corrections so the net gains will be minimal and more risk of knock.

    Click on our banner to visit our website!
    Video of our Stage 2 LPFP upgrade installation.

    BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways.

    Comment


    • #3
      Thank you for your answer. So fuel 98 is not enough.

      Comment


      • #4
        Or maybe the problem is in the settings?
        Attached Files

        Comment


        • #5
          Correct, 98 is not enough but you could try a different fuel station/source. It's not an issue with settings.

          Click on our banner to visit our website!
          Video of our Stage 2 LPFP upgrade installation.

          BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways.

          Comment


          • #6
            Which tmap sensor should i choose in settings? 1 or 2?

            Also I have very strange settings in WMI after FW upgrade to v22.
            Attached Files
            Last edited by szuli; 05-05-2023, 04:58 AM.

            Comment


            • #7
              It should be set to 2 and you can zero out all the WMI settings if not running meth.

              Everything else in the log is fine.

              Click on our banner to visit our website!
              Video of our Stage 2 LPFP upgrade installation.

              BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways.

              Comment

              Working...
              X