2021 A90 Supra Map 5 on E30 log check please.

[Surebob]

Here are some logs i did on map 5 with e30 (assuming pump was e85)

Mod List
MST V2 Intake.
AA High Flow Catted DP
Charge Pipe

[Steve @ BMS/Fuel-It!]

Timing looks pretty good but FF is dropping. Try setting it to 50 and disable wastegate adaption.

[Surebob]

Thanks for taking a look.

since I’m new to the platform, I don’t know what most of these settings do.

1. what is FF
2. Where do I change it for map5, or do I have to set up map 6 to change settings.
3. What is wastegate adaption and does turning it off have anything to do with the ewg connector?

also, if my timing looks good, and fuel is good, is it safe to push the stock turbo beyond the 22psi target?

[Steve @ BMS/Fuel-It!]

1. You can read up on those here... https://www.jb4tech.com/forum/model-...review-ab/993-

2. User adjustment settings are for ALL maps.

3. Leave it on unless instructed otherwise which I have done.


Best to do as instructed and post a log before moving on to more boost.

[Surebob]

Thank you for the reply. Before I made this post I also emailed terry and he recommended me to run this map 6(attached), I have only lowered Auto Shift Boost redux in hopes of eliminating power loss from 2nd to 3rd shift. I also noticed some potentially dangerous lean conditions in the log and would really appreciate if you can take a look at it, I kind of don’t want to bug terry too much over email.

here are my settings and logs attached, I have also included a Map 0 log with the same fuel in the tank (e30ish) Can you please advise on what I should do? Should I disable wastegate adoption on this map too? Should I lower FF? Do I need more E or less E?

[Steve @ BMS/Fuel-It!]

It's one or the other...email or forum support...no need to get both of us involved.

[Surebob]

I understand, it kind of unfolded that way unintentionally. But since you said my FFs were dropping and to turn of wastegate adoption, I wanted to get your input on the logs for the new map 6.