Log Review Needed Please! Car is feeling weird on Map 2

[Zach_Cohen_]

Hey! I have a 2020 x3 m40i

CTS ******* ********, and BMS intake.

Running map 2 and I notice boost jumps up to around 25-26 psi in 3rd gear. Car sounds loud but doesn’t feel like it’s pulling.

I did a few pulls on this log.

[Steve @ BMS/Fuel-It!]

Are you on factory flash? What does a log on map 0 look like?

[Zach_Cohen_]

Car isn’t flashed. On factory tune.

here’s a map 0 log.

thanks!

[Steve @ BMS/Fuel-It!]

Your ECU is targeting almost 20psi and overboosting at tip-in, so running additive maps like map 2 push your boost up even higher. Not sure why you are overboosting with JB4 disabled but I can't do anything in the adjustments for that.

How does map 4 look? Enable option 3 and do a map 4 log. You don't have enough octane to be pushing well over 20psi.

[Zach_Cohen_]

I selected Bit 3 and did a log on map 4.

thanks for the help!

[Steve @ BMS/Fuel-It!]

Looks pretty normal but your timing is low. It may learn up over time as there are no corrections so overall it looks clean.

[Zach_Cohen_]

Sounds good. Appreciate the help!