Announcement

Collapse
No announcement yet.

Kia/Genesis 3.5t JB4 Development

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #51
    Originally posted by FlooF View Post
    Is this compatible with the 3.5 G80 Sport?
    It is...but just be aware it's beta and definitely causes some hiccups in it's current state pretty often when you stomp it....As long as you don't dig into the throttle you won't notice the issues. Unfortunately when you stomp on it you get very unreliable power that cuts out forcing you to let off and re apply throttle to get back into the boost.

    Comment


    • #52
      GV70 3.5t JB4

      Haven't had any driveability issues, just can't get it to connect via bluetooth.

      Comment


      • #53
        Originally posted by ratedmmm View Post
        Haven't had any driveability issues, just can't get it to connect via bluetooth.
        I’m assuming you haven’t ran anything other than map 1….Soon as you run higher boost it will start cutting out. Map 2 works pretty ok most of the time but you may get occasional boost cut and map 3 and beyond will cut the boost pretty often.

        Comment


        • #54
          Has there been any further development on finding a resolution to the MAP 2 and 3 issues? I am in the process of installing my unit and would like to know if I should expect issues running MAP 2 or above on 93 octane fuel.

          Comment


          • #55
            Originally posted by RamAir View Post
            Has there been any further development on finding a resolution to the MAP 2 and 3 issues? I am in the process of installing my unit and would like to know if I should expect issues running MAP 2 or above on 93 octane fuel.
            We have not made any changes lately. Some cars work nicely with map2 and map3, others report mild boost oscillation, so its on a car by car basis currently until we can get a problem car on the dyno here to get to the bottom of the issue.
            Burger Motorsports
            Home of the JB4 the worlds most popular turbocharged tuning system!

            It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

            Comment

            Working...
            X