Announcement

Collapse
No announcement yet.

Log Check

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Log Check

    Ok, 1st log running my 2019 Stinger GT2 new plugs gapped at .022 and intake. Ran map2 for this log and any advice is welcome.
    Attached Files
    Last edited by Jvanderveen; 08-25-2022, 08:27 PM.

  • #2
    Can't review a picture. Send the CSV as a file attachment here.

    Comment


    • #3
      Ok, got it uploaded thanks for the pointer.

      Comment


      • #4
        Also, just an FYI Ean it on 92 octane. It's the highest available in oregon. I can get additive if that is necessary as it may run a bit lean?

        Comment


        • #5
          No attachment?

          Comment


          • #6
            I see it above the photo in the attacment area. In the original post above.

            Comment


            • #7
              I'm not sure what fuel you are using but timing doesn't look good. Because it's a fresh install I would do a battery disconnect for 5 min and let's start fresh there also.Click image for larger version

Name:	badtiming.jpg
Views:	93
Size:	122.5 KB
ID:	813038

              Comment


              • #8
                Looks like subpar fuel similar to 90 octane, maybe try another station.
                Burger Motorsports
                Home of the JB4 the worlds most popular turbocharged tuning system!

                It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

                Comment

                Working...
                X