3.3 stinger gt rwd 2021 jb4 wmi map3 log

[dbwlseowkd]

Injen air intakes

delete second exhaust filter

tuned exhaust

jb4 wmi

Please give me feed back with log

And help me out map 6 setting ㅠㅠ

[AWDGT2]

Three things.
1. This log is HUGE, please set it up to log at 80% throttle so it only logs important stuff
2. There is no wot or full pedal in this whole capture
3. Why are you in Map3 with WMI instead of Map 7?

[dbwlseowkd]

Three things.
1. This log is HUGE, please set it up to log at 80% throttle so it only logs important stuff
2. There is no wot or full pedal in this whole capture
3. Why are you in Map3 with WMI instead of Map 7?

1. Thanks alot!! Is this screen shot usefull ??
2.
3. I use map7 before over boost engine check appear...
So I try to setting map 6 but I have no idea...ㅠㅠ

[AWDGT2]

Lol, no. A clean WOT from 30-90 on a safe road. You can set up the JB to auto log during WOT 80% works well.
upload that csv and we can take care of you 👍

[dbwlseowkd]

Lol, no. A clean WOT from 30-90 on a safe road. You can set up the JB to auto log during WOT 80% works well.
upload that csv and we can take care of you 👍

Ok!! thanks alot with your comment!!

[AWDGT2]

Did you update your firmware? Because now you are on P20 and you should be on P21 for the Kia stinger. P20 is for the 1.6l and the 2.5l. You log is way off.

[dbwlseowkd]

Did you update your firmware? Because now you are on P20 and you should be on P21 for the Kia stinger. P20 is for the 1.6l and the 2.5l. You log is way off.

OMG !
That is not mine haha sorry
This is mine !!

[AWDGT2]

This isn't a WOT log. The red line is your throttle position. it's also from 83 mph to 100. From a roll, smash the pedal in a safe area and keep the pedal down until 90ish mph. Ensure you set up the app to auto log at 80% throttle and you will have something we can use.

[dbwlseowkd]

This isn't a WOT log. The red line is your throttle position. it's also from 83 mph to 100. From a roll, smash the pedal in a safe area and keep the pedal down until 90ish mph. Ensure you set up the app to auto log at 80% throttle and you will have something we can use.

Ok I setup pedal 80 auto log!
I will log it asap!! thanks alot sir!!

[dbwlseowkd]

This isn't a WOT log. The red line is your throttle position. it's also from 83 mph to 100. From a roll, smash the pedal in a safe area and keep the pedal down until 90ish mph. Ensure you set up the app to auto log at 80% throttle and you will have something we can use.

I made it sir!!
30mph -111mph auto pedal 80%!

[AWDGT2]

OK, few things.
You have Meth so lets tune that. Your logs are Map3, run another log but in Map7
Change your Meth Additive to 50 and keep your Scale at 60.
Do you have straight pipes or high flow cats? If not, put your FF back to 50 instead of 30 (unless someone like Terry told you to put it there for a reason I don't know of)
Put your Future Use A (FUA) to zero 0
This log actually started at 65 mph but that's OK.
Last, the first pull in this log looks like a crash and limp mode. The HPFP crashed on you... Are you running a high Ethanol content?

[dbwlseowkd]

OK, few things.
You have Meth so lets tune that. Your logs are Map3, run another log but in Map7
Change your Meth Additive to 50 and keep your Scale at 60.
Do you have straight pipes or high flow cats? If not, put your FF back to 50 instead of 30 (unless someone like Terry told you to put it there for a reason I don't know of)
Put your Future Use A (FUA) to zero 0
This log actually started at 65 mph but that's OK.
Last, the first pull in this log looks like a crash and limp mode. The HPFP crashed on you... Are you running a high Ethanol content?

I installed ewg cable before but it doesnt work well It made turbo truble code p2588
So I emailed burger motors
anyway thats why I change ff 30 I`ll turn it back to 50
I found map7 made p0049 trouble so I use map3 with wmi
I install straight second catalyst and Variable exhaust and I use 85 medical ethanol with water 15
Its winter in here ! I install winter tire few days ago
This is my wmi setting now and user setting I dont remember when I did it haha..

[dbwlseowkd]

OK, few things.
You have Meth so lets tune that. Your logs are Map3, run another log but in Map7
Change your Meth Additive to 50 and keep your Scale at 60.
Do you have straight pipes or high flow cats? If not, put your FF back to 50 instead of 30 (unless someone like Terry told you to put it there for a reason I don't know of)
Put your Future Use A (FUA) to zero 0
This log actually started at 65 mph but that's OK.
Last, the first pull in this log looks like a crash and limp mode. The HPFP crashed on you... Are you running a high Ethanol content?

I need your advice sir ㅠㅠ

could you help me more?

[AWDGT2]

Put your additive to 50, leave ff at 30 and so a log in Map7