Tweet
After installing the JB4 on my 1.6 K5 My gage cluster lit up the traction control and EPB error. Not wanting to see what would happen when I drive it in case it makes things worse I've uninstalled jb4. After that the CEL Light came on with the code U060F00. Attemtping to read the codes with the jb4 app shows no error codes. Any idea what might be causing the issue and how to fix it? Other than that the car drives fine. Also should JB4 be connected to the obdii port at all times for it to work? Or is it just for reading and deleting codes. Thanks in advance!
-
-
Update. The check engine light seemes to have went away. I'm still not sure what might be causing the EPB and traction control issues.Last edited by RussianStego; 01-22-2023, 02:30 PM. -
OBDII should be plugged in at all times. I would recommend plugging everything back in and reading codes once everything is connected again.Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.Comment
-
What are the fault codes exactly in the app? Could be an issue with the MAF connection. You could try putting only that connection to factory as a test.Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.Comment
Comment