Announcement

Collapse
No announcement yet.

Optima Map 2 log check

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Optima Map 2 log check

    2015 Optima SXL
    Hks mx40L plugs gapped @.020
    Throttle body spacer
    Bov soundplate
    93 octane
    Fuel wire attached

    Also, the pedal seems a bit laggy before 40mph. Any adjustments? Boost just seems to lag a bit
    Attached Files

  • #2
    Looks pretty normal to me. You can try FUA = 2 to see if that gets cyl 2-4 timing showing.
    Attached Files
    Burger Motorsports
    Home of the JB4 the worlds most popular turbocharged tuning system!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

    Comment


    • #3
      Thanks Terry. Can you check this one out after changing FUA to 2?
      Attached Files

      Comment


      • #4
        Not showing so go back to FUA = 0.

        You can play with DWP to see if 0, 60, or 80 feels better at partial throttle. But likely what you'll want is one of our pedal tuners to improve pedal response.
        Burger Motorsports
        Home of the JB4 the worlds most popular turbocharged tuning system!

        It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

        Comment

        Working...
        X