-
-
Last edited by thunder; 02-09-2023, 08:13 AM. -
Log looks good, although I would recommend lowering duty bias a bit until FF nearly matches PWM/WGDC on the log.Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.Comment
-
On this log i am at 50 duty bias so you recommend me 40,30,20...?Last edited by thunder; 02-10-2023, 05:41 AM.Comment
-
Start in the 40's and record a log. If it still looks high, lower again.Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.Comment
-
I didn't think 2.0 N cars had EWG wire option. Why does duty bias need adjusted if we don't have the connectors?Comment
Tweet
Comment