No announcement yet.

Please check my log

  • Filter
  • Time
  • Show
Clear All
new posts

  • Please check my log

    Hello all, I have a '23 Stigner GT2 AWD running the 450hp kit with HKS plugs gapped at 0.022" I thought the car wasn't pulling as it should at higher RPM. So I went out and hopefully got a good log this is map 2 and 93 octane. Thank you!
    Attached Files

  • #2
    Looks like those plugs may have too tight of a gap. I would recommend .025 for 93 octane.
    Burger Motorsports
    Home of the JB4 the worlds most popular turbocharged tuning system!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.