Announcement

Collapse
No announcement yet.

Meth integration for 991 and JB4

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Meth integration for 991 and JB4

    I have JB4 on 991. Having issues with meth kit integration. I have been able to direct wire pump and it flows. I opened FSB and had flashing green light indicating power and ground. However when I connect to JB4 I’m unable to get it to purge or WMI to flow. I have the obd2 interface so pins 2 and 15 are used. Flowing the guidance I put the orange wire to pin3 and blue to pin 16.

    Any suggestions?

  • #2
    Have you emailed our support team?

    [email protected]
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

    Comment

    Working...
    X