Volvo S60 T6 3.0 AWD

[tecnoprog]

Goodnight,

My JB4 arrived today, I already passed the OBD cable.
I'm not sure where to plug it in, its the photo of the engine.
Can anyone help?

Photo 2, the piece with the green circle, I imagine it's the MAP, but the connector doesn't work.

Thanks.

[Terry @ BMS]

The green sensor looks like one of the connections. I can check for the guide when I'm back at my desk tomorrow. The other sensor should be on the chargepipe.

[tecnoprog]

Hi,

From the JB4 connectors, it follows:

The 4 wire, connect to the intercooler maf;
The 3 wire, connect to the intake manifold maf;

I found the intercooler sensor and everything indicates that the connector is the same;
In the case of the intake map sensor, the connector is not compatible, I should look for a pair of connectors so I don't cut the original, can you tell me how to connect the wires?

I took a picture of the cables and the sensor.

In this link you have the sensor, with several pictures of it:

https://pt.aliexpress.com/i/4000974537726.html

Thanks

[tecnoprog]

Hi,

I forgot another detail, the map is the same, I will need to increase the size of the JB4 harness, because the sensors are on opposite sides.
One is on the top left and the other is on the bottom right.

tks

[tecnoprog]

Hi, does anyone have a manual?

About the maps and their parameters, I installed and apparently it is working. The engine temperature does not show correctly, I have another OBD reader that shows various information including temperature. I didn't feel any apparent improvement until map 3.

Thank you

[tecnoprog]

Can anyone help please?

[Terry @ BMS]

I added the guide to the app, maps 1-3 are what you'll use depending on the octane.

For real time assistance you'd need to email us as we don't check the forum on time.

But since it's installed, post up a map0 and map1 log, and lets evaluate it.

[tecnoprog]

I recorded the log from mapa0 to mapa3.
I have a gauge installed.
The turbo pressure reaches a peak of 1.2 bar, this in map0, in other maps 1, 2 and 3 the pressure is not enough.

Vehicle:
Brand: Volvo
Model: S60 T6 AWD R-design
Year: 2015
Engine: 3.0

Modifications:
Intake 3"
turbine upgrade
******** 3" (without intermediary)
I kept the rear muffler