2017 Jetta 1.4 Manual Stage 3 Log Check

[ZZZZLOW]

I need some help getting my turbo dialed in. I've had this turbo on for about 8 months or so, and recently blew my motor at 32psi. Turbo would surge on high boost, low rpm until I set peak boost to start at 4k. Now with the replacement motor in, I have had to remove my fmic as when the shop dropped the replacement motor in, the hot and cold side ic piping rubbed and blew open, so now I'm back to factory water/air cooling. Now I surge on map 1 even, so I have been trying to readjust some things. Send help as now it seems it's just dumping boost through the wg instead of holding.


Current Mods:
Running 93 oct:
TTE290 Turbo
ECS Tuning Big Bore Inlet
CTS Turbo 3in DP
2.5in "race exhaust"
Stage 2 Unitronic flash
Injen Intake
TCS Retrofit
APR Coilpack
Step 8 Plugs
JB4
BC Racing Coilovers
Firehawk Indy 500's

https://docs.google.com/spreadsheets/d/1Ai1dl7FB_lWUQL4EOT0yY_YM3p2wYPwPyHitvB5cVnA/edit?usp=sharing

https://docs.google.com/spreadsheets/d/1BjdDak6Nt9ZOzscnaAydRdPk8UywrbZdRMZZEOFhiIU/edit?usp=sharing

[George @ BMS]

First thing I would do is flash the ECU so you can increase the fueling ceiling.
For more help email me at [email protected]. We havent done a car with this turbo so dont even know if its possible.

[ZZZZLOW]

First thing I would do is flash the ECU so you can increase the fueling ceiling.
For more help email me at [email protected]. We havent done a car with this turbo so dont even know if its possible.

It’s got a unitronic stage 2 flash.