[alexis485]

Currently, I have Stoptech drilled rotors and brake pads. After three or four pulls (60-140), the brakes start to fade.

I just bought R1 Concept slotted rotors and I planning to stack it with PFC brake pads. BTW, I'll be using these on the streets as well. So, I'm debating between PFC 08 and 11. Anyone that has used PFC's please chime in.

Thanks in advanced.

[elsabor67]

The PFC 08 is a TRACK ONLY pad. They are not going to behave like normal pads on the street like a normal or above average performance pad out there. On a circuit though they are incredible and once they warm up the bite and modulation is great. I swap mine at the track and when done, I swap back to my street pads, which are stoptech.

If you are only using them for braking after a drag race, I would look at other pads unless you are willing to swap them back and forth.

[alexis485]

Originally Posted by elsabor67

The PFC 08 is a TRACK ONLY pad. They are not going to behave like normal pads on the street like a normal or above average performance pad out there. On a circuit though they are incredible and once they warm up the bite and modulation is great. I swap mine at the track and when done, I swap back to my street pads, which are stoptech.

If you are only using them for braking after a drag race, I would look at other pads unless you are willing to swap them back and forth.

Gracias compai!

I'm not looking to swap pads back and forth. Have you used ebc redstuff or yellowstuff instead? Any other recommendation?