JB4tech.com - International Turbo Tuning Discussion
(#1)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default EcoBoost Mustang JB4 Dyno Testing! - 09-12-2018, 01:16 PM

Was able to get our hands on a EcoBoost 4-banger Mustang for some dyno testing and was pleasantly surprised with the results.

Baseline and map1 were run on 91 octane, and then later we added in a couple gallons of E85 to get up to an E30 mix to better simulate good fuel. Peak power gains with the JB4 were ~30whp & ~40wtq on 91, and ~60whp & 100wtq on E30. In some areas under the curve delta was much higher.

On the road performance is dramatically improved, you can really feel the extra torque. And the installation is a relatively simple 10 minute job you can put on or take off easily. We're moving the system in to production and will let everyone know when we have some early units for alpha testers.

Name:  mustang_jb4_dyno_1.jpg
Views: 2578
Size:  123.0 KB

Name:  IMG_20180912_094634115_HDR.jpg
Views: 1907
Size:  194.1 KB

Name:  IMG_20180912_094705675.jpg
Views: 1868
Size:  173.9 KB

Stock log:
Name:  map0_log.jpg
Views: 1859
Size:  42.6 KB

Map1 log:
Name:  map1_log.jpg
Views: 1865
Size:  42.5 KB

E30 (map5) log:
Name:  map5_log.jpg
Views: 1865
Size:  41.9 KB


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 6,328
Join Date: Oct 2013
Car: e90 335i
Default 09-17-2018, 06:06 AM

This car is so fast after the JB4, night and day difference. That torque is just insane!



Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
PR3CI5N335i's Avatar
PR3CI5N335i PR3CI5N335i is offline
Need4Speed
 
Posts: 1,083
Join Date: Nov 2011
Car: 2010 E90 335i M-sport
Default 11-14-2018, 06:48 PM

Any updates? I want to install one on my buddies car


SOLD - FBO N54, Pure Turbos stage 2, TFT inlets, JB4/MHD, EOS intake manifold w/PI, Fuel-it stage 3
Reply With Quote
(#4)
Old
Payam @ BMS's Avatar
Payam @ BMS Payam @ BMS is offline
Super Moderator
 
Posts: 6,328
Join Date: Oct 2013
Car: e90 335i
Default 11-14-2018, 07:19 PM

Quote:
Originally Posted by PR3CI5N335i
Any updates? I want to install one on my buddies car
I think it should be released in a couple of weeks. Just waiting on the harness' to arrive


Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#5)
Old
Bullitt1841's Avatar
Bullitt1841 Bullitt1841 is offline
Demigod
 
Posts: 1,505
Join Date: Aug 2011
Car: '07 335i Sedan, Built & Blown '08 Mustang Bullitt
Default 11-14-2018, 09:27 PM

Quote:
Originally Posted by PR3CI5N335i
Any updates? I want to install one on my buddies car
What? You're buyin it for him?


2018 Audi RS3 | APR Stage 1 E85 | JB4 | APR FMIC

SOLD: 2017 F36 440i Gran Coupe | PS2 | JB4

SOLD: 2007 E90 335i | PS2's | JB4 | 160k+ miles on the car, 120k+ miles on the JB4

Log, log, then log some more...
Reply With Quote
(#6)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 11-14-2018, 10:15 PM

It's in production, will waiting for harnesses.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#7)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 12-23-2018, 10:39 PM

JB4 for the Mustang turbo released!

Ford Mustang EcoBoost JB4 Tuner | Burger Motorsports


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#8)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 03-23-2019, 09:59 AM

We've shipped a few systems out now.. Hoping for customers feedback and logs soon so w can work on cranking up the power!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#9)
Old
Hrc630@hotmail.com Hrc630@hotmail.com is offline
New Member
 
Posts: 1
Join Date: Apr 2019
Car: Mustang Ecoboost
Default 04-17-2019, 08:20 PM

Hi, I have install my JB4 today and WOW !!
I have only run the map 1 for now and it’s night and day !
Tomorrow I will install the obd2 cable and make some log to see if all is ok but for now I can’t believe how the base map 1 make power.
Next week I will go on the dyno an make some testing.
My car is a brand new Mustang Ecoboost with the Performance package.
JB4 installed today at 3000 km so we will see how it perform with my futur mod.
Next week I will install a new intercooler and filter + colder plug.
Reply With Quote
(#10)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 04-18-2019, 09:02 AM

Awesome! Add some logs here and we can ensure it's all working as it should be.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#11)
Old
Ben_TPPH Ben_TPPH is offline
Junior Member
 
Posts: 51
Join Date: Jul 2021
Car: Mazda3 Turbo Premium Plus Hatch
Default 12-20-2021, 12:34 AM

Is this thread just dry or is there a new thread? I traded my Mazda3 Turbo in for a Mustang Ecoboom and I’m strongly considering getting another JB4
Reply With Quote
(#12)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 12-25-2021, 01:55 PM

This is the thread for them!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#13)
Old
JoeHPP3 JoeHPP3 is offline
New Member
 
Posts: 4
Join Date: May 2022
Car: 2020 mustang ecoboost hpp/hp
Default 05-28-2022, 10:54 AM

Is there any difference between the tune firmware for the ecoboost with stock 310 hp, and the ecoboost with the 332 hp stock (the hpp that came out in 2020). Currently I have a 2020 ecoboost hpp, and I'm using the Maserati ghibli beta tune. Also running e30. Is that the correct tune for me?

Having a hard time determining if there is or isn't a difference between the tuning on the 2 different ecoboost mustangs.

Ias a reference i know the Cobb Tuners differentiates between the 2.

Any help would be greatly appreciated. Thanks!
Reply With Quote
(#14)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 06-01-2022, 07:17 AM

I recently added Mustang specific firmware under platform 88. Load it up and log map2, lets check it out.

But generally speaking we've kept the same general mapping for all the Mustang models as they are effectively similar enough.


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#15)
Old
JoeHPP3 JoeHPP3 is offline
New Member
 
Posts: 4
Join Date: May 2022
Car: 2020 mustang ecoboost hpp/hp
Default 88 firmware map 2 e30 3rd gear full throttle logs - 06-01-2022, 09:43 AM

Hi Terry,

I updated the firmware to the 88 mustang ecoboost, and I selected map 2 - 93/e30. I am using e30 now and I did a couple 3rd gear full throttle logs. The JB4 looks like it combined both runs on the same log. It felt pretty good. Let me know what you think of the logs.
Attached Files
File Type: csv P88_M2_R4_jnero3_220601_1218.csv (37.8 KB, 20 views)
Reply With Quote
(#16)
Old
JoeHPP3 JoeHPP3 is offline
New Member
 
Posts: 4
Join Date: May 2022
Car: 2020 mustang ecoboost hpp/hp
Default 06-02-2022, 09:38 AM

Can you take a look at my log, super curious to see how it looks, thanks man
Reply With Quote
(#17)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 06-03-2022, 08:00 AM

You're already emailing me so replied to the email!


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#18)
Old
JoeHPP3 JoeHPP3 is offline
New Member
 
Posts: 4
Join Date: May 2022
Car: 2020 mustang ecoboost hpp/hp
Default 06-03-2022, 08:04 AM

Gotcha. Thanks!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright 2007 - 2022, JB4tech.com