JB4tech.com - International Turbo Tuning Discussion
(#1)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default JB4 for 2022+ Subaru WRX - 06-23-2022, 08:37 AM



Use subject to terms and conditions posted at http://www.burgertuning.com/terms.html

THIS PART IS LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW, AND IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. California law defines a "racing vehicle" as "a competition vehicle not used on public highways." (Calif. Health & Safety Code 39048) This part may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. USE OF THIS PART IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, INC, AND CAN VOID YOUR VEHICLE'S WARRANTY. It is your responsibility to comply with all applicable federal and state laws relating to use of this part, and Burger Motorsports, Inc hereby disclaims any liability resulting from the failure to use this part in compliance with all applicable federal and state laws.

Order Here: https://burgertuning.com/products/jb...for-subaru-wrx

Install guide: http://www.jb4tuned.com/instructions/WRX_JB4_Guide.pdf

JB4 Mobile Smart Phone wireless connection directions Click here
BMS data cable hard wired directions and software Click here

JB4 Map Guide:

Map0: Fully disable JB4
Map1: +3psi peak over stock, default map, suitable for all fuels.
Map2: +4psi peak, suggested for 93 octane or higher
Map3: +6psi peak, suggested for 30% E85
Map4: +7psi peak, suggested for 30% E85 along with bolt on modifications
Map5: +7psi peak, no boost taper, more aggressive version of map4.
Map6: User adjustable by RPM map on user adjustment page, values are peak boost over stock by RPM under heavy throttle.
Map7: Progressive WMI mapping, under development


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#2)
Old
Terry @ BMS's Avatar
Terry @ BMS Terry @ BMS is offline
Tuner
 
Posts: 34,246
Join Date: Jan 2008
Default 06-23-2022, 08:39 AM

Our initial WRX dyno testing
Attached Images
    


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
(#3)
Old
Riverside Riverside is offline
New Member
 
Posts: 2
Join Date: Jun 2022
Car: 2022 WRX
Default Today, 05:21 AM

Thanks for the update Terry…. Looking forward to hearing firsthand feedback from customers too…

Additionally, if there are any Aussies who have purchased the JB4, please share your experience with compatibility with the Australian spec vehicles…

Please also state sedan or wagon and model (e.g. base, RS, tS etc)


Coming: 2022 WRX sedan, M6
Reply With Quote
(#4)
Old
Cannon @ BMS Cannon @ BMS is offline
Super Moderator
 
Posts: 631
Join Date: Sep 2021
Car: Evo VIII
Default Today, 12:59 PM

Quote:
Originally Posted by Riverside
Thanks for the update Terry…. Looking forward to hearing firsthand feedback from customers too…

Additionally, if there are any Aussies who have purchased the JB4, please share your experience with compatibility with the Australian spec vehicles…

Please also state sedan or wagon and model (e.g. base, RS, tS etc)
Hey there! JB4 will still be compatible with the FA24DIT in Australian market


Burger Motorsports
Home of the JB4 the worlds most popular turbocharged tuning system!

It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




vBulletin Skin developed by: vBStyles.com
Copyright © 2007 - 2022, JB4tech.com