 |
|
||||
| |||||
|
||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
(#1)
|
|
||||
G8X M3 and M4 Fuel-It! Flex Fuel kits have been released -
11-18-2021, 01:24 PM
Hey all,
We've released our new flex fuel kits for the G8X with our brand new braided lines and a super easy plug and play installation. The new kit simply replaces the stock fuel line in the engine bay so it only takes about 30 minutes to install. Click here to purchase kit The G8X flex fuel kit and install location...    Closeup of install location...  Here's the complete installation guide... Remove the strut brace with a 15mm socket or wrench and then remove the engine cover.   Remove the gray safety clip on each end of the stock fuel line...  To remove the stock fuel line, let the car sit overnight so there is no fuel pressure. Then push the line on as much as possible, depress the black clip, and then pull the line off.  Install the fuel lines, analyzer, and harness on to the ethanol sensor as shown. Connect the ends with the 3/8" fuel fittings to the ethanol sensor as shown. Here's a video showing how to connect the fittings. How to install our Cam-Lock! style fitting. - YouTube Install the new fuel lines with the sensor and analyzer installed...    Connect the analyzer to ground...  Connect the white wire to the JB4 pin 4 of the DB25 connector...  Connect the power wire...     Click on our banner to visit our website! Video of our Stage 2 LPFP upgrade installation. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. 
|
|
(#2)
|
|
||||
|
11-18-2021, 08:33 PM
Nice writeup! I made it a sticky here.
 Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
11-23-2021, 09:20 PM
|
(#4)
|
|
||||
|
11-25-2021, 03:43 PM
Quote:
Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
(#6)
|
|
|||
|
05-16-2022, 01:38 PM
It is not required, but is highly recommended to ensure you have the proper amount of ethanol in your tank for your current setup.
Home of the JB4 the worlds most popular turbocharged tuning system! It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
|
|
(#7)
|
|
|||
|
08-05-2022, 09:27 PM
Greetings, just installed one of these kits today and noticed the readings within the fuel-it app and JB4 app are slightly different. I’m still running pump 91 at the moment — fuel it app is showing E09 and JB4 is showing E06. Is it normal for them not to be the same? Some setting I missed? I swear I followed the instructions as described, with white wire going to pin 4
Thanks YA
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
Copyright © 2007 - 2022, JB4tech.com